升降机升降平台升降货梯

news

How to reasonably reduce the aluminum alloy lift shake怎样合理减少铝合金升降机的晃动

    铝合金升降机作为高空作业设备,一般情况下都会升高到6米以上来进行作业,近期,有客户反映,铝合金升降机升高到一定高度时会摆动,影响了正常作业,那么,应该怎样去减小铝合金升降机在作业时的摆动呢?

1、在作业前支腿完全打开,并支撑好,这是首先要做的,也是最重要的一步。

2、为了人身以及设备安全,承载的重量不能高于最大载重量,升高高度能最好控制在适合工作的高度,能10米工作,就不要升到11米。

3、使用铝合金升降机时,如果有风的话,尽量不要使用,必须使用的话,可以拉防风绳进行安全保护。当遇到强度十分大的工作时候,最好加强四根支撑腿,同时最好用绳索固定作业平台四角,加强稳定性。避免出现因为过度摇摆造成各种升降机事故。升降平台是钢材制成的,使用的又是液压系统。本身来讲的话就有一定的弹性。

Aluminum alloy lift as high-altitude work equipment, generally will rise to more than 6 meters to work, recently, customers reported that aluminum alloy lift to a certain height will swing, affecting the normal operation, so, how should go to reduce the aluminum alloy lift in the operation of the swing?
The first and most important step is to fully open and support the leg before the operation.
For the safety of people and equipment, the carrying weight should not be higher than the maximum carrying weight. The lifting height should be better controlled at the height suitable for work. If it can work for 10 meters, it should not rise to 11 meters.
When using aluminum alloy lift, if there is wind, try not to use, must use, can pull the wind rope for safety protection. When encountering intensity very big work, had better strengthen 4 support leg, had better fix with rope at the same time work platform 4 corners, strengthen stability. Avoid all kinds of lift accidents caused by excessive sway. Lifting platform is made of steel, the use of hydraulic system. By itself, it’s elastic.

 



Prev:
Next:

无觅相关文章插件,快速提升流量

X

Online Chat

hello 您好,欢迎咨询,请问有什么可以帮您?