Mobile lift has the characteristics of small shape, light weight, small swing, easy to move, large bearing capacity, stable lifting and so on. It has easy access to the common foyer, and access to the common elevator for high-rise operation. It USES a two-phase power supply, has powerful functions, and is equipped with manual pressure lifting device. It is easy to use and is the ideal climbing equipment.
Mobile lift in use, the need for regular inspection and maintenance to eliminate potential hazards and eliminate failures, which is beneficial to improve work efficiency, extend the life of equipment and ensure the safety of the elevator. Ensure the drive position of grease fittings is lubricated twice a month. For parts that cannot be added to butter, be sure to clean oil lanes or replace grease fittings until butter can be added. Otherwise, please do not use the device.
Mobile lift to remove the oil tank of the hydraulic fuel, filter cover, test hole, hydraulic tubing and other parts, so as to avoid the system oil duct bare when the dust, before the removal of the need to thoroughly clean and remove parts. If removing the hydraulic oil cap, please first remove dirt around the oil cap. After loosening the oil tank cover, clean the debris remaining in the joint. After cleaning, open the tank cover. If a wipe material and hammer are required, select a wipe material that does not remove fiber impurities and fix it to the rubber with a suitable hammer. Hydraulic assemblies and hoses should be carefully cleaned and assembled by air drying under high pressure. Use the original filter that wraps the tangent. When changing the oil, clean the filter at the same time. Please carefully clean the bottom of the filter shell with wiping material before turning the filter element.
Mobile lift has a variety of types, can be roughly divided into: traction type, self-propelled type, hand push type, aluminum alloy type.
Mobile lift is mainly used for mechanical installation, equipment maintenance, station, dock, bridge, hall, workshop, indoor and outdoor construction and maintenance, is a kind of high altitude equipment. Therefore, the safety of its use should also be paid attention to, and the use of the need for standardization.