Lift manufacturers introduced that many customers do not have the way to do foundation requirements, there is a demand for goods up and down. There is no way to excavate the installation site. Usually there are pipes below, or basements, and some are installed above the second floor, so there is no way to make the foundation.
Elevator manufacturers is analysis of the goods and take into account manual handling or using forklift equipment, if it is manual handling, so the height of the platform and ground differences also is no problem, but if you use the forklift truck to carry, will need to be ground and working mesa in a plane, or a top and bottom of slope can be up and down. So their own higher equipment is not easy to do in the location of the foundation can not be installed. This kind of situation we usually recommend the use of guide type lifting platform, its own height is generally in 10-20 cm, so do
The goods can be carried up and down by a slope.
Elevator factory summary for the ground do foundation, we can ensure that bearing the weight of the elevator, in can’t play on the ground of the excavation pit embedded parts and the iron plate, fixed elevator in order to have the effect of solid elevator, also must have in order to avoid bearing wall, main wall is the basis of guarantee the stability of the elevator, and downstairs and upstairs foundation must be balanced.
Lift manufacturers analysis board is every lift necessary accessories, whether it is moving or fixed need to be assembled. Both mobile and stationary units require assembly. We seldom notice it when we use it or buy it, and seldom measure its thickness. If the specification is not up to standard, long time use will really bring some problems to the equipment. All of our countertops are laid with high-strength patterned steel plates. The standard thickness of our freight elevator is 5mm, which can prevent the deformation or hollow tread of the countertops in the process of loading and unloading goods. The pattern on the steel plate also effectively plays a role in anti-skid. If the customer’s load is too large, will also increase the figure plate. Here to remind the majority of users must pay attention to this item when buying, to see whether your table panel load bearing meet your use requirements, acceptance should also pay attention to the measurement. Simple customers in the acceptance of these equipment can be used for measuring acceptance calipers, so as to avoid the loss caused by the business cut corners.