升降机升降平台升降货梯

What are the USES of mini lifts? How to maintain it?-迷你升降机的用途有哪些?该如何去保养?

    迷你升降机,顾名思义,是比较小型的升降机设备,济南赛力机械就生产这种设备,那么迷你升降机有哪些用途呢?该如何去保养呢?下面就专业的讲解一下。 用途:适用于车站、码头、商场、体育场馆、小区物业、厂矿车间等大范围作业。整机保质期为一年,随时提供零配件,终生跟踪服务。 自身具有行走及转向驱动功能,不需人工牵引,不需外接电源移动灵活方便,令高空作业更加方便快 ...
Product Details

    迷你升降机,顾名思义,是比较小型的升降机设备,济南赛力机械就生产这种设备,那么迷你升降机有哪些用途呢?该如何去保养呢?下面就专业的讲解一下。

用途:适用于车站、码头、商场、体育场馆、小区物业、厂矿车间等大范围作业。整机保质期为一年,随时提供零配件,终生跟踪服务。

自身具有行走及转向驱动功能,不需人工牵引,不需外接电源移动灵活方便,令高空作业更加方便快捷,是现代企业高效安全生产的理想高空作业设备。

    保养:

     1、把液压油放尽弃掉,拧紧接头掏出过滤器,洗清后,用压缩空气清理干净,然后放回油箱,并连接好管路。(换上新游,不要继续使用旧油。否则液压升降机系统中的运动部件就会加速磨损)

     2、卸下并拆开升降机下降阀,用压缩空气将柱塞吹净,然后装入,重新安上。

     3、检查所有的液压管道和接头。管道不能有破损,接头不能有松动,必须将所有接头拧紧。

升降机年终保养

    1、液压油的油质和油位。升降机全程升起,在这位置时,液压地面应高出箱底40~50毫米。如发现液压油变暗、发粘或者有砂砾等异物,应及时更换32#液压油。

    2、各部位均加注一些润滑油,延长升降机轴承使用寿命。检查液压升降机滚轮、中间轴及轴承,油缸销轴及轴承,骨架铰轴机轴承等有无磨损。

    3、液压系统任何部位之间,必需首先卸压,以免压力油喷出,升降机工作台突然下滑。

    4、不得任意调整溢流阀。液压升降机系统中的每个元件都是在额定压力下工作的。人鱼调整溢流阀后,可能会造成液压系统非正常运转。

    5、在升降机工作平台下面检验时,必须吊住、支撑升降机工作平台,以防升降机突然下降。

    6、非专业志愿不得随意拆装电器,以防触电或误解。

    以上就是关于迷你升降机的内容,如果你还想了解更多升降机的相关知识,可以来济南赛力机械的网站详细了解。

Mini lift, as the name suggests, is a relatively small lift equipment, jinan saili machinery production of this equipment, so what is the use of mini lift? How to maintain it? Now let’s talk about it professionally.
Application: suitable for station, wharf, shopping mall, gymnasium, community property, factory and mine workshop, etc. The warranty period of the whole machine is one year, spare parts are provided at any time, lifelong tracking service.
It has the function of walking and steering drive, no manual traction, no external power supply, flexible and convenient movement, which makes the high-altitude operation more convenient and fast. It is the ideal high-altitude operation equipment for modern enterprises to produce efficiently and safely.
Maintenance:
Discard all the hydraulic oil, tighten the connector, remove the filter, clean it with compressed air, then put it back into the tank, and connect the pipeline. Change to a new swimming pool instead of using the old oil. Otherwise the moving parts in the hydraulic lift system will accelerate wear and tear.
2. Remove and disassemble the descending valve of the lift, blow the plunger clean with compressed air, then install and reinstall.
3. Check all hydraulic pipes and joints. There must be no damage to the pipe or looseness of the joints. All joints must be tightened.
Lift year-end maintenance
Oil quality and oil level of hydraulic oil. Lift all the way up, in this position, the hydraulic ground should be 40~50 mm above the bottom of the box. If you find any foreign matter such as dark, sticky or gravel in the hydraulic oil, you should replace the no. 32 hydraulic oil in time.
2. Add some lubricating oil to all parts to extend the service life of lift bearing. Check the wear of hydraulic lift roller, intermediate shaft and bearing, cylinder pin shaft and bearing, frame hinge shaft bearing and so on.
3, any part of the hydraulic system, must be the first pressure relief, so as to avoid pressure oil gush, lift table suddenly slipped.
4. The overflow valve shall not be arbitrarily adjusted. Each element of the hydraulic lift system operates at rated pressure. Mermaid adjust the overflow valve, may cause abnormal operation of the hydraulic system.
5. When inspecting under the lift working platform, the lift working platform must be suspended and supported to prevent the sudden descent of the lift.
6. Non-professional volunteers shall not disassemble or install electrical appliances at will to avoid electric shock or misunderstanding.
The above is about the mini elevator content, if you also want to know more about the elevator related knowledge, can come to jinan saili machinery website to understand in detail.



Tags:
Prev:
Next:

Leave a Reply

无觅相关文章插件,快速提升流量

X

Online Chat

hello 您好,欢迎咨询,请问有什么可以帮您?