升降机升降平台升降货梯

What are the USES of mini lifts and how can they be maintained?-迷你升降机的用途有哪些,该如何去保养?

迷你升降机,顾名思义就是比较小型的升降机械设备,济南赛力机械就有这种设备的生产,那么迷你升降机有哪些用途呢?下文是最专业的解说,一起来了解一下吧。

用途:

适用于车站、码头、商场、体育场馆、小区物业、厂矿车间等大范围作业。整机保质期为一年,随时提供零配件,终生跟踪服务。

自身具有行走及转向驱动功能,不需人工牵引,不需人工牵引,不需外接电源移动灵活方便,令高空作业更方便快捷,是现代企业高效安全生产的理想高空作业设备。

保养

1、把液压油放尽弃掉,拧紧接头掏出油过滤器,洗清后,用压缩空气清理干净,然后放回油箱,并连接好管路(换上新油,不要继续使用旧油。否则液压升降机系统中的运动部件就会加速磨损)。

2、卸下并拆开升降机下降阀,用压缩空气将柱塞吹净,然后装入,重新安上。

3、检查所有的液压管道和接头。管道不能有破损,接头不能有松动,必须将所有接头拧紧。

升降机年终保养

4、液压油的油质和油位。升降机全程升起,在这位置时,液压油面应高出箱底40~50毫米。如果发现液压油变暗、发粘或者有砂砾等异物,应及时更换32#液压油。

5、各部位均加注一些润滑油,延长升降机轴承使用寿命。检查液压升降机滚轮、中间轴及轴承,油缸轴销及轴承,臂架铰轴及轴承等有无磨损。

6、液压系统任何部位之间,必须首先卸压,以免压力油喷出,升降机工作台潸然下滑。

7、不得任意调整溢流阀。液压升降机系统中的每个元件都是在划定压力下工作的。任意调整溢流阀后,可能会造成液压系统非正常运转。

8、在升降机工作平台下面检验时,必须吊住、支撑升降机工作平台,以防升降机潸然下降。

9、非专业职员不得随意拆装电器,以防触电或误接。

以上就是关于迷你升降机的内容,如果您还想了解更多升降机的相关知识,可以关注济南赛力机械的网站,这里的内容移动式您最想知道的。

Mini elevator, as the name suggests is a relatively small lifting machinery, ji ‘nan saili machinery has this kind of equipment production, so what is the use of mini elevator? Below is the most professional explanation, to understand it together.
USES:
Suitable for station, dock, market, gymnasium, estate property, factory and mine workshop, etc. The warranty period of the whole machine is one year, spare parts are provided at any time, lifelong tracking service.
It has the function of walking and steering drive, no manual traction, no manual traction, no external power supply, flexible and convenient to move, making the high-altitude operation more convenient and fast. It is the ideal high-altitude operation equipment for modern enterprises to produce efficiently and safely.
maintenance
Discard all the hydraulic oil, tighten the connector, take out the oil filter, clean it with compressed air after cleaning, then put it back into the oil tank, and connect the pipeline (replace with new oil, do not continue to use the old oil). Otherwise, the moving parts in the hydraulic elevator system will be accelerated wear).
Remove and disassemble the lift down valve, blow the plunger clean with compressed air, then install and reinstall.
Inspect all hydraulic tubing and fittings. Pipes must not be broken and joints must not be loose. All joints must be tightened.
Lift year-end maintenance
The quality and level of the hydraulic fluid. The hydraulic oil level shall be 40~ 50mm higher than the bottom of the tank when the lift is raised all the way. If you find any foreign matter such as dark, sticky or sand and gravel in the hydraulic oil, you should replace 32# hydraulic oil in time.
All parts are filled with some lubricating oil to extend the service life of lift bearing. Inspect hydraulic elevator roller, intermediate shaft and bearing, cylinder shaft pin and bearing, arm hinge shaft and bearing for wear.
Between any parts of the hydraulic system, must be the first pressure relief, so as to avoid pressure oil gush, lift work table down.
The overflow valve shall not be arbitrarily adjusted. Each element of the hydraulic lift system operates under a defined pressure. Any adjustment of the relief valve may result in abnormal operation of the hydraulic system.
When inspecting under the working platform of the lift, the working platform of the lift must be hung and supported to prevent the lift from falling down.
Non-professional staff shall not remove or install electrical appliances at will in case of electric shock or misconnection.
The above is about the content of the mini lift, if you also want to know more about the relevant knowledge of the lift, you can pay attention to the ji ‘nan saili machinery website, the content here mobile you want to know.



Prev:
Next:

无觅相关文章插件,快速提升流量

X

Online Chat

hello 您好,欢迎咨询,请问有什么可以帮您?