升降机升降平台升降货梯

news

How to operate the platform correctly高空升降台如何正确操作

    在当代社会,高空升降台已经广泛应用于工业及各种商业领域,但是由于它有移动的危险系数,所以大多单位在采购过程中关心的不仅仅是质量、高度,更多的是关心安全系数,下面就给大家说一下高空升降台如何正确操作。

1、使用升降台必须经过专业培训合格后,才可使用。

2、升降平台操作人员必须按照机械设备的保养规定,在执行各项检查和保养后方可启动升降平台,工作前应检查升降平台车的工作范围,清楚妨碍升降平台车回转机行走的障碍物。

3、支撑是升降平台操作的一项重要准备工作,应选择平整的地面,如地基松软或欺负不平,必须用枕木垫实后,才可进行工作。

4、升降平台一般应先起下臂,再起中臂,最后其上臂。在升降平台回转操作过程中,必须在下臂起升一定高度后方可进行回转,回转应缓慢,同时注意剪臂及平台对各种设备的距离是否满足安全需要。

5、在升降平台上工作的操作人员应佩戴安全带,在带电区域工作时,应将车体按规定进行接地。

6、升降平台作业前,工作负责人应向操作人员进行技术和安全交代,内容应包括:工作内容及要求;安全注意事项及危险点;人员分工情况及责任范围。

7、工作负责人除了要对车况和操作人员进行检查以外,还要负责查看地形环境、起降是否符合安全技术措施的要求或实现指定的工作方案,如有,则应制定出相应的措施后方能开始工作。

    以上所述就是如何来正确的操作高空作业升降台,希望对大家有所帮助。

In the contemporary society, the high-altitude platform has been widely used in industry and various commercial fields, but because it has the risk of moving, so most units in the procurement process is not only concerned about the quality, height, more is concerned about the safety factor, the following to say how to operate the high-altitude platform correctly.
The lifting platform must pass professional training before it can be used.
Lifting platform operators must be in accordance with the maintenance provisions of mechanical equipment, in the implementation of the inspection and maintenance before the start of the lifting platform, should check the work scope of the lifting platform car, clear obstacles to the lifting platform car back to the transfer walk.
Support is an important preparation for lifting platform operation, should choose flat ground, such as soft foundation or bully uneven, must use sleepers pad solid, can be carried out.
Lifting platform should generally start with the lower arm, the middle arm, and finally its upper arm. In the course of lifting platform rotation operation, the lower arm must be lifted to a certain height before the rotation, the rotation should be slow, and pay attention to whether the shear arm and the distance between the platform and various equipment meet the safety needs.
Operators working on the lifting platform should wear safety belts. When working in live areas, the car body should be grounded according to regulations.
Before lifting the platform operation, the person in charge of the work should explain to the operator technology and safety, the content should include: work content and requirements; Safety precautions and danger points; Division of labor and scope of responsibility.
In addition to checking the vehicle conditions and operators, the person in charge of the work shall also be responsible for checking whether the terrain environment, take-off and landing meet the requirements of safety technical measures or implement the designated work program.
The above is how to correctly operate the aerial work lifting platform, hope to help everyone.



Prev:
Next:

无觅相关文章插件,快速提升流量

X

Online Chat

hello 您好,欢迎咨询,请问有什么可以帮您?