升降机升降平台升降货梯

news

Fixed shear fork type elevator automatic descent trouble shooting method-固定剪叉式升降货梯自动下降故障排除方法

1:固定式升降货梯承重或者载货以后自然下降1~2公分,然后就不动了。这种情况一般是液压系统的正常现象,因为机械及液压提供存在性伸缩性。

2:空载的时候下降1~2公分,然后再下降。这种情况大多是油缸内部有内漏的情况,需要确认更换液压缸。

3:剪叉式升降货梯一直连续下降。这种情况一般是液压锁内有脏污,清洗液压锁即可解决问题。当然也可能是液压锁坏了,需要更换。

4:固定式升降货梯在上升过程中,出现滑落的情况,一般下降2公分左右,这种情况一般是漏油或者油量不足或者有气体进入缸体的分情况。

固定式升降货梯出现漏油怎么办?发现液压缸漏油,应立即停机,及时发现漏油点,实行堵漏处理。不要等油漏光了才做处理。如果是小量漏油,应该先查找漏油点。可以将油缸、油管及各个阀体等擦干净,然后升降动作,查找漏油点。

1: fixed elevator cargo ladder load or load natural drop 1~2 cm, and then do not move. This situation is generally a normal part of hydraulic systems, as machinery and hydraulics provide existential scalability.
2: drop 1~2 cm when no load, and then drop again. This is mostly the case of internal leakage inside the cylinder, which needs to be confirmed to replace the hydraulic cylinder.
3: shear fork elevator cargo ladder has been falling continuously. This kind of circumstance is inside hydraulic lock commonly dirty, clean hydraulic lock to be able to solve a problem. Of course, it is possible that the hydraulic lock is broken and needs to be replaced.
4: fixed elevator in the process of rising, there is a falling situation, generally fall 2 cm or so, this situation is generally oil leakage or insufficient oil or gas into the cylinder block points.
Fixed elevator cargo ladder oil leakage do? If oil leakage is found in the hydraulic cylinder, stop the machine immediately. Don’t wait until the oil runs out. If it’s a small amount of oil, look for the leak first. Can oil cylinder, oil pipe and each valve body, etc. wipe clean, and then lift action, find oil leakage point.



Prev:
Next:

无觅相关文章插件,快速提升流量

X

Online Chat

hello 您好,欢迎咨询,请问有什么可以帮您?